An electric generator is a device designed to produce electricity from a different form of energy.
The different forms of energy, which are transformed into electricity, are usually mechanical energy, chemical energy, photovoltaic energy or directly thermal energy.
Depending on their characteristics, there are several types of electric generators. The analysis of these generators is not limited only to the generators used in photovoltaic solar energy, but we will make a brief review of all types of electric generators. Photovoltaic generators
The geothermal heat pump is an air conditioning system for buildings that exploits the heat exchange with the superficial subsoil, by means of a heat pump. Since the heat in the subsoil comes largely from the interior of the Earth, geothermal energy of low enthalpy is classified as a source of renewable energy, although the heat pump itself consumes electricity, generally produced from other sources of energy (for example, fossil fuels).
The heat pump allows the exchange of heat between a "source" at a lower temperature than the "well", or the point where the heat is introduced. In a…
An inverter is an electronic device. The function of the inverter is to change a DC input voltage to a symmetrical AC output voltage, with the magnitude and frequency desired by the user. The inverters use in a great variety of applications, from small power supplies for computers, to industrial applications to control high power. The inverters are also used to convert the direct current generated by photovoltaic solar panels, accumulators or batteries, etc., into alternating current and thus be able to be injected into the electrical network or used in isolated electrical installations.…
An inverter is an electronic device. The function of the inverter is to change a DC input voltage to a symmetrical AC output voltage, with the magnitude and frequency desired by the user. The inverters use in a great variety of applications, from small power supplies for computers, to industrial applications to control high power. The inverters are also used to convert the direct current generated by photovoltaic solar panels, accumulators or batteries, etc., into alternating current and thus be able to be injected into the electrical network or used in isolated electrical installations.
In electronics, a photoelectric cell or a photovoltaic cell is an electrical / electronic device that converts the incident energy of solar radiation into electricity through the photovoltaic effect. Photovoltaic cells are the basic components of photovoltaic modules, which are solar panels capable of generating electrical energy from solar radiation. It is therefore the essential basic element for this type of renewable energy.
Compounds of a material that has a photoelectric effect absorb photons of light and emit electrons. When these free electrons are captured, the result is an electric…
Low-temperature solar thermal installations are considered those installations of solar thermal energy that provide useful heat at temperatures below 65 ° C through solar energy.
A low-temperature solar thermal installation consists of solar collectors, two water circuits (primary and secondary), heat exchanger, accumulator, expansion vessel and pipes.
The circulation of water inside the circuits can be obtained by thermosiphon, taking advantage of the density difference of the water at different temperatures or by means of a circulation pump. Although with a circulation…
Renewable energy is that energy that comes from practically inexhaustible natural sources. They are considered inexhaustible either because of the large amount of energy they contain or because they can be regenerated naturally.
Among the main advantages of renewable energies we highlight the following:
Renewable energies are respectful with the environment and do not pollute.In this sense, they are safer and pose fewer health risks than other sources of non-renewable energy.
In most cases they are simple to dismantle and it is not necessary to guard their waste, as it…
We have two definitions of electricity depending on whether ns refer to physical phenomena on a macroscopic scale or on a microscopic scale.
With the term electricity we refer generically to all physical phenomena in a macroscopic scale that involves one of the fundamental interactions, the electromagnetic force, with particular reference to electrostatics. At the microscopic level, these phenomena are due to the interaction between charged particles on a molecular scale: the protons in the nucleus of atoms or ionized molecules and the electrons. The typical macroscopic effects of such…
Photovoltaic modules or solar panels are devices that are used to capture the energy of the sun's light. Photovoltaic solar panels contain a set of solar cells that convert light into electricity. It is called solar because the sun is one of the strongest energy sources for this type of use. Solar cells are sometimes called photovoltaic cells, and photovoltaics literally means "light-electricity". Solar cells have the photovoltaic effect to absorb the sun's energy and cause electrical current to flow between two charged layers in the opposite direction.
Currently, the costs associated…
Coal is a fossil fuel that is used to obtain fossil energy through its combustion. The thermodynamic properties of coal allow obtaining a large amount of heat energy during its combustion process.
Coal is a sedimentary rock of organic origin, black or dark brown. It is used mainly as a fossil fuel because of its high calorific value because it has a majority carbon content. Coals can be classified by the percentage of carbon they contain, which is related to the percentage of moisture and impurities. According to this criterion, peat, lignite, coal and anthracite can be distinguished.…
A photovoltaic solar installation connected to the network has only three basic elements:
- A group of photovoltaic solar panels. These solar panels are usually located on the roof of a building or integrated into any structural element of the same building. The photovoltaic panels can also be arranged directly on any land near the electricity grid.
- Ondulator or electronic inverter-converter. This device transforms the energy in the form of direct current provided by the solar panels, in alternating current of the same type and value as the one transported by the electric…
The direct current is a type of electric current very important in solar energy where the direction of flow of electric charges (electrons) does not vary. In many devices the symbol to indicate direct current is DC (direct current), or using the symbol of a continuous line (-) flanked by three shorter lines (---), for the alternating current that is used instead of AC (alternating current) or the symbol (~).
The flow of charges occurs through a conductor, such as a metallic thread. The flow could also be established through a semiconductor, an insulator or even vacuum as in a cathode…
A solar panel is a device to take advantage of solar energy. It can also be called a solar module.
Photovoltaic solar panels contain a set of solar cells that convert light into electricity. It is called solar because the sun is one of the strongest energy sources for this type of use. Solar cells are sometimes called photovoltaic cells, and photovoltaics literally means "light-electricity". Solar cells have the photovoltaic effect to absorb the sun's energy and cause electrical current to flow between two charged layers in the opposite direction.
The denomination of solar panel…
The notion of watt-peak is used to compare the performance of photovoltaic solar installations and to predict the amount of electricity that can be produced under optimal conditions.
To compare the capacity of solar panels, there are established standard conditions: at an irradiance of 1 kW / m², whose spectrum corresponds to the spectrum of sunlight in an air mass of 1.5 (this means that sunlight passing through the atmosphere is equal one and a half times the average thickness of the atmosphere), and a cell temperature of 25 ° C.
The objective of having the maximum…
Biofuels are fuels obtained from biomass (agricultural crops such as palm oil, sugar cane, soybeans, etc.) or from organic waste. The fuel generated is a liquid fuel that can be used in the engines of vehicles.
This energy source is considered non-renewable energy because the generation and recovery time of the fields is less than the consumption time.
The biofuels generated can be of two types:
- Bioethanol, a substitute for gasoline, produced from sugarcane, beet, corn, wheat and oats.
- Biodiesel, a substitute for diesel, produced by plants such as sunflower,…
We refer to hight-temperature solar thermal to those collectors who work at temperatures above 500 ° C. They are used for power generation.
The technologies used in hight-temperature solar thermal energy are:
Parabolic trough solar collectors…
- Parabolic trough solar collectors
- Central tower
- Parabolic dishes or parabolic reflector
- Linear Fresnel concentrators
For the conversion of fossil energy into electrical energy, the technology of a thermal power plant is often used. At the moment in which a thermal power station is fossil fuels fossilized from a source of non-renewable energy generation.
A thermal power plant (or thermoelectric plant) is a plant that generates electricity by transforming heat. Historically heat energy is converted into electricity by transferring heat to a working fluid and then transforming the energy of this fluid into mechanical energy. Finally, mechanical energy is transformed into electricity. The…
Hydraulic fracturing or geotechnical fracking is the exploitation of the pressure of a fluid, typically water, to create and then propagate a fracture in a layer of rock in the subsoil. Fracking is carried out after a drilling in a rock formation containing hydrocarbons (oil or natural gas). The objective is to increase the permeability. Improving permeability improves the production of oil or gas contained in the subsoil and increases its recovery rate.
Hydraulic fractures in rocks can be both natural and created by humans; they are created and enlarged by the pressure of the fluid…