Panels photovoltaic solar energy

Installation of thermal solar energy

Solar power plant
Thermoelectric

Fluid

Geothermal heat pump

Geothermal heat pump

The geothermal heat pump is an air conditioning system for buildings that exploits the heat exchange with the superficial subsoil, by means of a heat pump. Since the heat in the subsoil comes largely from the interior of the Earth, geothermal energy of low enthalpy is classified as a source of renewable energy, although the heat pump itself consumes electricity, generally produced from other sources of energy (for example, fossil fuels).

The heat pump allows the exchange of heat between a "source" at a lower temperature than the "well", or the point where the heat is introduced. In a…

Fracking

Fracking

Hydraulic fracturing or geotechnical fracking is the exploitation of the pressure of a fluid, typically water, to create and then propagate a fracture in a layer of rock in the subsoil. Fracking is carried out after a drilling in a rock formation containing hydrocarbons (oil or natural gas). The objective is to increase the permeability. Improving permeability improves the production of oil or gas contained in the subsoil and increases its recovery rate.

Hydraulic fractures in rocks can be both natural and created by humans; they are created and enlarged by the pressure of the fluid…

Geothermal energy to generate electricity

Geothermal energy to generate electricity

Geothermal energy is that energy that can be obtained by man through the use of heat from the interior of the Earth. This type of energy has many applications. One of these applications is the generation of electric power.

The generation of electricity from geothermal energy is a good complement for hydroelectric plants, which also has the advantage that it is constant throughout the year.

Geothermal plant

Geothermal power plants are the plants responsible for converting geothermal energy into electricity. A geothermal plant is a facility where electricity is generated…

Geothermal energy

Geothermal energy

Geothermal energy is a type of renewable energy on a human scale that is obtained from the heat of the interior of the Earth. Equestrian thermal energy can be obtained without the combustion of any material, it is therefore a form of clean energy without carbon dioxide emissions.

The temperature in the inner layers of the Earth remains constant during the different seasons of the year. Generally the inner layers are hotter than the surface in winter and cooler in summer. This is because the surface layers are heated and cooled more easily according to the laws of thermodynamics.

Thermal solar collectors

Thermal solar collectors

A solar thermal collector is a component of a solar thermal installation. A solar collector is a type of solar panel responsible for capturing solar energy and transforming it into heat. It is also called the solar thermal collector.

The solar collector is the basic element of this renewable energy source.

From solar collectors there are many types. The solar collector used will depend on the use that is going to be given. For example, if we want to heat a pool to a temperature of 25-28ºC, in the spring, we need a simple sensor, since the ambient temperature will easily be…

Heat

Heat

In physics, in particular in thermodynamics, heat is defined as the contribution of transformed energy as a result of a chemical or nuclear reaction and transferred between two systems or between two parts of the same system. This energy is not attributable to a job or a conversion between two different types of energy. Heat is, therefore, a form of transferred energy and not a form of energy contained as internal energy.

As the energy is exchanged, the heat is measured in the International System in joules. In practice, however, it is often still used as the unit of measurement of calories,…

Components of a solar thermal installation

Components of a solar thermal installation

The function of a solar thermal installation is to take advantage of solar energy to generate heat. The solar panels of these facilities capture the heat of the solar radiation that falls on them to heat a fluid. The different ways to take advantage of this hot fluid allows us to use this type of renewable energy in multiple applications.

A solar thermal installation consists of:

  • Solar collectors
  • Primary and secondary circuits
  • Heat exchanger
  • Accumulator, pumps
  • Glass of expansion
  • Pipelines
  • Main control panel.

Flat solar collector

Flat solar collector

The flat plate thermal solar collector has a good cost / effectiveness ratio in moderate climates and adapts correctly to a large number of applications (hot water heating, pool heating, heating support, preheating industrial fluids, etc.).

We can distinguish two basic types of flat plate collectors, depending on the configuration of the absorber: the "grid type" parallel, in the vertical and horizontal versions and the "serpentine type" series. Basically, the difference between the two is:

  • The parallel configuration favors that the temperature of the collector can be stratified…

Hybrid solar panel - PVT

Hybrid solar panel - PVT

A hybrid solar panel (more correctly defined as a PVT collector, an acronym P hoto V oltaic and T hermal) is a device that allows the conversion of the energy radiated by the sun partly into electrical energy and partly into thermal energy through the combination of the effect of a photovoltaic module and a thermal solar panel (photovoltaic cogeneration).

Therefore, a hybrid solar panel is composed of a photovoltaic collector to which a heat exchanger is associated, capable of heating a fluid thanks to the part of the solar radiation not converted into electrical energy.

Origin…

What is solar thermal energy?

What is solar thermal energy?

Thermosolar energy is a technology to generate electricity or electricity by thermal energy from the Sun (solar heat). It is a type of solar thermal energy. Solar thermal energy is characterized by using solar radiation to heat a fluid. This hot fluid (usually water) can be used for many applications such as heating or hot water (DHW). But another application that can be given is the generation of electric power.

This type of energy is also often called thermoelectric power.

This process of electricity generation takes place in the so-called thermoelectric solar or solar thermal…

Stirling engine

Stirling engine

The Stirling engine was invented in 1816 by Robert Stirling, a Scottish priest. The goal was to get a less dangerous engine than the steam engine.

The operation of the Stirling engine is based on the expansion and contraction of a gas that can be helium, hydrogen, nitrogen or air. This gas is forced to cycle cyclically from a cold source where it contracts to a hot source where it expands. It is considered as a thermal engine (thermodynamic engine) due to the presence of a temperature gradient between the two thermal sources.

Originally, the Stirling engine was conceived as an…

Solar thermal power plant

Solar thermal power plant

A solar thermal power plant or thermosolar power plant is an industrial facility in which solar radiation is used to generate electricity. Solar radiation is used to heat a fluid. Using fluid, taking advantage of the laws of thermodynamics, the necessary power is produced to move an alternator to generate electrical energy as in a classic thermoelectric power station.

Operation of a solar thermal power station

The operation of a solar thermal power plant is based on obtaining heat from solar radiation and transferring it to a heat carrier medium. This heat carrier is usually…

Solar heating systems with forced circulation

In many cases it is not viable to install solar power equipment for the production of hot water thermosyphon, since often the location of the solar collectors is above the tank (for example, sensors on the roof and inside the accumulator & rsquo; housing, golf sensors, etc.)

.

In this type of installation, the water flowing between the collector and the accumulator can not do it by natural convection since warmer water (sensors) and is at its highest point and there is no natural force that makes displace the cold water that is already at the lowest point and is the heaviest.

Domestic hot water (DHW)

Domestic hot water (DHW)

One of the applications of solar thermal energy is the obtaining of sanitary hot water (ACS). Solar collectors capture the energy of solar radiation to increase the temperature of a fluid.

Domestic hot water (DHW) is water intended for human consumption (potable) that has been heated. It is used for sanitary uses (bathrooms, showers, etc.) and for other cleaning uses (washing dishes, washing machine, dishwasher, floor scrubbing). In terms of energy, the ACS is an important component to take into account, since it represents between 25 and 40% of the energy consumption of homes.

As…

High-temperature solar thermal energy

We refer to hight-temperature solar thermal to those collectors who work at temperatures above 500 ° C. They are used for power generation.

The technologies used in hight-temperature solar thermal energy are:

  • Parabolic trough solar collectors
  • Central tower
  • Parabolic dishes or parabolic reflector
  • Linear Fresnel concentrators
Parabolic trough solar collectors

Medium temperature solar thermal energy

Medium temperature solar thermal energy

Low-temperature solar thermal energy is used in applications that require temperatures between 100ºC and 250ºC. From 80ºC the flat collectors practically no longer have any performance and it is necessary to resort to other capture systems.

Low-temperature thermal energy systems are used mainly for applications that demand thermal energy, that is, heat between 125º C and 400º C. To reach higher temperatures it is necessary to concentrate the solar radiation.

For this type of solar thermal energy, two types of solar collectors are used:

  • Solar…

Low temperature thermal solar energy

Low temperature thermal solar energy

Low thermal solar installations are considered those installations that provide useful heat at temperatures below 65ºC through solar energy.

A low-temperature solar thermal installation consists of solar collectors, two water circuits (primary and secondary), heat exchanger, accumulator, expansion vessel and pipes.

Circulation of the water inside the circuits can be obtained by thermosiphon, taking advantage of the density difference of the water at different temperatures or by means of a circulation pump, although in this case an external contribution of electrical energy…

Parabolic cylinder solar collector

Parabolic cylinder solar collector

The parabolic cylinder solar collector is another type of solar thermal collector. This type of solar panel used in solar thermal installations uses parabolic cylinders to concentrate all the solar radiation in a point. Instead of heliostats, this type of collector employs parabolic trough mirrors. For the focus of the parabola passes a pipe that receives the concentrated rays of the Sun, where the fluid is heated, usually a thermal oil. Currently the fluid reaches temperatures close to 400º C.

Until recently, the use of thermal solar CCP concentration systems was restricted to…

Solar panel. What is it?

Solar panel. What is it?

A solar panel is a device to take advantage of solar energy. It can also be called a solar module.

Photovoltaic solar panels contain a set of solar cells that convert light into electricity. It is called solar because the sun is one of the strongest energy sources for this type of use. Solar cells are sometimes called photovoltaic cells, and photovoltaics literally means "light-electricity". Solar cells have the photovoltaic effect to absorb the sun's energy and cause electrical current to flow between two charged layers in the opposite direction.

The denomination of solar panel…

Hydraulic turbines

Hydraulic turbines

A turbine is a turbomachine that converts the energy of flow of a fluid (liquid or gas) into mechanical energy by means of a system of rotating blades. This mechanical energy can be used to power another machine or an electric generator.

The turbine name was proposed by Claude Burdin during an engineering contest in 1828. This name comes from the Latin turbine, which means Foucault current.

A simple turbine consists of a single rotor with vanes, which provide exchange of energy with the flow. The first examples of turbines are wind turbines and water mills (wind power and hydropower).