The geothermal heat pump is an air conditioning system for buildings that exploits the heat exchange with the superficial subsoil, by means of a heat pump. Since the heat in the subsoil comes largely from the interior of the Earth, geothermal energy of low enthalpy is classified as a source of renewable energy, although the heat pump itself consumes electricity, generally produced from other sources of energy (for example, fossil fuels).
The heat pump allows the exchange of heat between a "source" at a lower temperature than the "well", or the point where the heat is introduced. In a…
We have two definitions of electricity depending on whether ns refer to physical phenomena on a macroscopic scale or on a microscopic scale.
With the term electricity we refer generically to all physical phenomena in a macroscopic scale that involves one of the fundamental interactions, the electromagnetic force, with particular reference to electrostatics. At the microscopic level, these phenomena are due to the interaction between charged particles on a molecular scale: the protons in the nucleus of atoms or ionized molecules and the electrons. The typical macroscopic effects of such…
The function of a solar thermal installation is to take advantage of solar energy to generate heat. The solar panels of these facilities capture the heat of the solar radiation that falls on them to heat a fluid. The different ways to take advantage of this hot fluid allows us to use this type of renewable energy in multiple applications.
A solar thermal installation consists of:
- Solar collectors
- Primary and secondary circuits
- Heat exchanger
- Accumulator, pumps
- Glass of expansion
- Main control panel.
A solar collector of evacuated tubes is a type of solar panel that uses solar thermal energy. The finality of solar collectors is converting solar radioation into thermal energy.
This renewable solar energy system uses a type of solar panel consisting of linear collectors housed in evacuated glass tubes.
The evacuated tube solar collector consists of a set of cylindrical tubes. The tubes are formed by a selective absorber, located on a reflector settlement and surrounded by a transparent glass cylinder.
The vacuum has been made between the transparent outer tube and…
Geothermal energy is a type of renewable energy on a human scale that is obtained from the heat of the interior of the Earth. Equestrian thermal energy can be obtained without the combustion of any material, it is therefore a form of clean energy without carbon dioxide emissions.
The temperature in the inner layers of the Earth remains constant during the different seasons of the year. Generally the inner layers are hotter than the surface in winter and cooler in summer. This is because the surface layers are heated and cooled more easily according to the laws of thermodynamics.…
A forced circulation for solar water heater is an installation in which the water circulates inside the circuit driven by a pump. With forced circulation system, the movement of water in the closed circuit is forced by a pump. This feature makes a big difference with respect to sanitary hot water installations with thermosyphon. In this way, it artificially moves the hot water not to the highest point of the closed circuit, but it does so from the solar collectors down to where the accumulator is located.
In many occasions it is not viable to install solar thermal equipment…
One of the applications of solar thermal energy is the obtaining of sanitary hot water (ACS). Solar collectors capture the energy of solar radiation to increase the temperature of a fluid.
Domestic hot water (DHW) is water intended for human consumption (potable) that has been heated. It is used for sanitary uses (bathrooms, showers, etc.) and for other cleaning uses (washing dishes, washing machine, dishwasher, floor scrubbing). In terms of energy, the ACS is an important component to take into account, since it represents between 25 and 40% of the energy consumption of homes.
In electricity, the rated voltage of an electrical device is the voltage that must not be exceeded in normal operation. The nominal adjective is because that tension usually serves to characterize the device, to name it. The nominal value indicates the theoretical or ideal value of anything that can be quantified, as opposed to the real value, which is what is obtained in a given measurement.
Another definition of rated voltage: The rated voltage is the specific potential difference for which a device or installation is designed.
As it is a nominal value it implies that the voltage…
These equipments have a natural circulation based on convection currents formed in the fluid at different temperatures.
If we heat a water tank at the bottom when the bottom water warms, it becomes less dense and rises to the surface where it cools. Then returns to the bottom of the container and thus a natural circulation flow is generated.
This is the operating principle of a thermosiphon team, which will be essential that:
- The solar collector (heat sources) is always located below the level of the accumulator.
- The primary circuit is as short as possible…
The efficiency of photovoltaic cells is one of the elements that determine the production of a photovoltaic solar energy installation. The other factors that determine the performance of a solar plant are latitude and climate.
The conversion efficiency value of a photovoltaic cell depends on several factors. When we refer to conversion efficiency, we refer implicitly to the thermodynamic efficiency, to the separation efficiency of the load carrier, to the reflectance efficiency and to the values of conduction efficiency. These parameters are difficult to measure…
Low-temperature solar thermal installations are considered those installations of solar thermal energy that provide useful heat at temperatures below 65 ° C through solar energy.
A low-temperature solar thermal installation consists of solar collectors, two water circuits (primary and secondary), heat exchanger, accumulator, expansion vessel and pipes.
The circulation of water inside the circuits can be obtained by thermosiphon, taking advantage of the density difference of the water at different temperatures or by means of a circulation pump. Although with a circulation…
Although in principle it seems that in an installation of photovoltaic solar energy just need solar modules and batteries, there is a key element in these facilities is what ensures that, in the charging process as in the discharge accumulators, is made so that they are always within the correct operating conditions: the charge controller.
Solar panels are designed so that they can give a higher than the end voltage battery charging voltage. This ensures that the solar panels are always able to charge the battery, even when the temperature of…
An inverter is an electronic device. The function of the inverter is to change a DC input voltage to a symmetrical AC output voltage, with the magnitude and frequency desired by the user. The inverters use in a great variety of applications, from small power supplies for computers, to industrial applications to control high power. The inverters are also used to convert the direct current generated by photovoltaic solar panels, accumulators or batteries, etc., into alternating current and thus be able to be injected into the electrical network or used in isolated electrical installations.…
An inverter is an electronic device. The function of the inverter is to change a DC input voltage to a symmetrical AC output voltage, with the magnitude and frequency desired by the user. The inverters use in a great variety of applications, from small power supplies for computers, to industrial applications to control high power. The inverters are also used to convert the direct current generated by photovoltaic solar panels, accumulators or batteries, etc., into alternating current and thus be able to be injected into the electrical network or used in isolated electrical installations.
What is silicon?
Silicon is a chemical element of atomic number 14 and symbol Si. This chemical element belongs to group IV A of the periodic table. JJ Berzelius 1824 isolated it by reduction with potassium of silicon tetrafluoride (SiF4).
The crystalline elemental silicon is grayish in color with a metallic luster, very hard, with very high melting and boiling points, and is an intrinsic semiconductor. The amorphous form of the element occurs in brown powders, conductive of electricity, which can be easily melted and vaporized.…
An electric generator is a device designed to produce electricity from a different form of energy.
The different forms of energy, which are transformed into electricity, are usually mechanical energy, chemical energy, photovoltaic energy or directly thermal energy.
Depending on their characteristics, there are several types of electric generators. The analysis of these generators is not limited only to the generators used in photovoltaic solar energy, but we will make a brief review of all types of electric generators. Photovoltaic generators
In the early days of photovoltaic solar energy, the electrification facilities used electricity for consumption at the same voltage and with the same form that they received from photovoltaic solar panels and accumulators, that is, 12, 24, 48 volts in direct current. This made a big difference with the users that had electricity distribution network or generator sets at 220 volts AC.
The appliance market has adapted to the majority of users and we can find any appliance with 220 volts of alternating current. Therefore, getting reliable, quality, and reasonably priced appliances that…
A solar thermal collector is a component of a solar thermal installation. A solar collector is a type of solar panel responsible for capturing solar energy and transforming it into heat. It is also called the solar thermal collector.
The solar collector is the basic element of this renewable energy source.
From solar collectors there are many types. The solar collector used will depend on the use that is going to be given. For example, if we want to heat a pool to a temperature of 25-28ºC, in the spring, we need a simple sensor, since the ambient temperature will easily be…